翻訳と辞書
Words near each other
・ G7 Kitakyushu Energy Ministerial Meeting
・ G7 Method
・ G7 Records
・ G7 Welcoming Committee Records
・ G7+
・ G70
・ G70 Fuzhou–Yinchuan Expressway
・ G7011 Shiyan–Tianshui Expressway
・ G72 Quanzhou–Nanning Expressway
・ G7211 Nanning–Youyiguan Expressway
・ G75 Lanzhou–Haikou Expressway
・ G7511 Qinzhou–Dongxing Expressway
・ G76 Xiamen–Chengdu Expressway
・ G77
・ G78 Shantou–Kunming Expressway
G7a torpedo
・ G7e torpedo
・ G7es torpedo
・ G7th Capo Company
・ G8 (disambiguation)
・ G8 Alternatives
・ G8 Climate Change Roundtable
・ G8 Research Group
・ G8+5
・ G80 Guangzhou–Kunming Expressway
・ G8011 Kaiyuan–Hekou Expressway
・ G85 Yinchuan–Kunming Expressway
・ G8511 Kunming–Mohan Expressway
・ G9
・ G9 (album)


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

G7a torpedo : ウィキペディア英語版
G7a torpedo

The G7a (T1) was the standard issue ''Kriegsmarine'' torpedo during the early years of World War II.
== Design ==
The G7a(TI) torpedo was 533.4 mm (21 in) in diameter, 7163 mm (23 ft 6 in) in length (with a type Ka or Kb warhead and Pi1 or Pi2 pistol), the warhead holding a charge of approximately 280 kg (617 pd) of Hexanite. It was the standard issue torpedo for all German U-boats and surface torpedo-bearing vessels of the war.
The torpedo was of a straight-running unguided design, controlled by a gyroscope. The G7a(TI) was of variable speed, running a distance of 5,000 m at 81 km/h (5,500 yd at 44kt), 7,500 m at 74 km/h (8,250 yd at 40 kt), and 12,000 m at 55.6 km/h (13,200 yd at 30 kt). The 44 kt setting was used only by torpedo boats like the ''Schnellboote'' on torpedoes with reinforced engine.
The G7a(TI) was the last naval torpedo of German design to use a wet heat method of propulsion. The torpedo was powered by a steam-engine fed by a mixture of compressed air and steam. Fuel decalin was burning in a combustion-chamber, creating steam from fresh water. The torpedo's speed was determined by the level of pressure (three settings for 30/40/44 kn) from the low-pressure regulator feeding air to the bottom of the combustion-chamber. The resulting superheated steam powered a four cylinder reciprocating engine, in turn powering a pair of contra-rotating propellers.
Though this system of propulsion gave the G7a(TI) great speed and endurance – the greatest of any production model German torpedo of World War II – it had the distinct disadvantage of being very noisy and leaving a long wake of bubbles, common to most torpedoes of the period, with the exception of the Japanese Type 93 and submarine Type 95, which were fuelled by enriched oxygen. For U-boats, this relegated the G7a(TI) for use mainly at night, when its wake was least noticeable, so as to not give away the element of surprise and the location of the submarine that fired it.
The G7a(TI) was initially fitted with a combined mechanical/magnetic exploder, which was inadequately tested (like the U.S. Navy's Mark 14), having never been live fired.〔Bekker, Cajus. ''Hitler's Naval War'' (New York: Zebra, 1977), p.132.〕 In addition, because the G7a's performance had never been assessed, between deep running and premature explosions〔Bekker, pp.128, 133, and 137.〕 (both also familiar to the Mark 14),〔Blair, Clay, Jr. ''Silent Victory'' (New York: Bantam, 1976), pp.160 & 413.〕 the G7a suffered a thirty percent failure rate early in World War II.〔Bekker, p.125.〕 The response of the high command, ignoring complaints and blaming the operators,〔Bekker, p.125.〕 was also common to the U.S. Pacific Fleet's Submarine Force.〔Blair, pp.62 & 361.〕 The problems were so serious, Admiral Dönitz said, "...never before in military history has a force been sent into battle with such a useless weapon."〔Bekker, quoted p.132.〕

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「G7a torpedo」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.